AirPigz

@AirPigz

http://t.co/iLddVHDJiZ... Hog Wild About Anything That Flies! blogazine & podcast from Martt Clupper. Check it out!

First dry fit of ribs on the stabilator spar, including leading and trailing edge pieces. Hope to glue together yet tonight.

Views 209

2019 days ago

First dry fit of ribs on the stabilator spar, including leading and trailing edge pieces. Hope to glue together yet tonight.

7 Comments

Realtime comments disabled

AirPigz 2018 days ago

Just to clarify: the rudder ribs were cut on a band saw (each one a different size) but these ribs were cut with a router & template.

Windtee 2019 days ago

Never mind. I just read you used a band saw. Very nice fit!

Windtee 2019 days ago

Looks clean! Did you cut out those ribs yourself? Whadya use to cut?

AirPigz 2019 days ago

The plans call for separate pieces of 1/16" ply for leading edge, 1 top, 1 bottom. I'm gonna do aluminum and both glue (T-88) and nail in place.

AirPigz 2019 days ago

The aft end of the fuselage is around 6" wide with 3 large eye bolts attached off the end. Corresponding eye bolts attached to stab spar make the hinge.

AirPigz 2019 days ago

It has a 7 foot span. The end of the fuselage fits in the open space in the leading edge strip, right back to the stab spar.

JulieVessigault 2019 days ago

Wow! That's looking good Martt!